Author Topic: Tom Woods CV Driveshafts - LJ  (Read 1048 times)

Offline Runner

  • Committee: Vendor
  • *
  • Posts: 1756
Tom Woods CV Driveshafts - LJ
« on: April 10, 2017, 01:15:06 PM »
These are setup for a 231 transfer case and a 3.5" lift. They have less than 5k miles and are in great shape.
$350
2004 Wrangler Unlimited - "Owning a Jeep is a sickness. However, it's one I'll gladly endure!"

Offline 02tj

  • Member 2017 VA4WD/BRC
  • *
  • Posts: 1119
  • Jeffersonton, Va
Re: Tom Woods CV Driveshafts - LJ
« Reply #1 on: April 10, 2017, 03:47:03 PM »
dayum... was hoping they were 1350s

Offline Runner

  • Committee: Vendor
  • *
  • Posts: 1756
Re: Tom Woods CV Driveshafts - LJ
« Reply #2 on: April 10, 2017, 07:39:14 PM »
dayum... was hoping they were 1350s

Yeah I opted for flex over the stronger 1350. I'm light on the skinny pedal and never broke a joint,  even though I covered up to red trails at Rausch.
2004 Wrangler Unlimited - "Owning a Jeep is a sickness. However, it's one I'll gladly endure!"

Offline rocknrubi04

  • Forum User
  • Posts: 1179
  • TJ Rubicons Rule
Re: Tom Woods CV Driveshafts - LJ
« Reply #3 on: April 11, 2017, 08:50:14 AM »
Do you have the front?

Offline JEEPIN J

  • Member 2017
  • *
  • Posts: 3425
  • Arlington, VA
Re: Tom Woods CV Driveshafts - LJ
« Reply #4 on: April 11, 2017, 08:58:54 AM »
Do you have the front?
Sounds like there is both front and rear
97 TJ 35s & the like
Build on NVJA
Build on JF

Offline Runner

  • Committee: Vendor
  • *
  • Posts: 1756
Re: Tom Woods CV Driveshafts - LJ
« Reply #5 on: April 11, 2017, 10:08:18 AM »
Do you have the front?
Sounds like there is both front and rear

It is both front and rear.  For now, my preference is to sell as a pair.  It's a definitely a good deal, considering the limited use they've seen.
2004 Wrangler Unlimited - "Owning a Jeep is a sickness. However, it's one I'll gladly endure!"

Offline overhead

  • Member 2017
  • *
  • Posts: 9085
  • Crap, someone call Trevor.
Re: Tom Woods CV Driveshafts - LJ
« Reply #6 on: April 11, 2017, 10:16:46 AM »
Do you have the front?
Sounds like there is both front and rear

It is both front and rear.  For now, my preference is to sell as a pair.  It's a definitely a good deal, considering the limited use they've seen.

Can you measure collapsed and extended when you have a sec? Please and thank you
The only thing about a Yj that's reliable is its mechanic.

Joey to Mike- That's more like it! Never done.....just outta money at the moment.

atjeep-Every time a YJ passes inspection, an angel gets it's wings.

Offline Runner

  • Committee: Vendor
  • *
  • Posts: 1756
Re: Tom Woods CV Driveshafts - LJ
« Reply #7 on: April 11, 2017, 11:08:33 AM »

Can you measure collapsed and extended when you have a sec? Please and thank you

I'll get them when I get home this evening.  If it helps, I know these were setup for the following:

Front = 40.25" yoke center to center (measured at 3 and 9 o'clock for both yokes)
Rear  = 26.25" yoke center to center (measured at 3 and 9 o'clock for both yokes)
2004 Wrangler Unlimited - "Owning a Jeep is a sickness. However, it's one I'll gladly endure!"

Offline rocknrubi04

  • Forum User
  • Posts: 1179
  • TJ Rubicons Rule
Re: Tom Woods CV Driveshafts - LJ
« Reply #8 on: April 23, 2017, 08:04:13 AM »
Still Interested if you split them up
Brett

Offline sirjames186

  • Club Secretary
  • *
  • Posts: 1647
  • 05 LJ
Re: Tom Woods CV Driveshafts - LJ
« Reply #9 on: August 11, 2017, 09:04:50 AM »
Runner do you still have these?  I'm starting to price out SYE kits and might need them.
"I'm no longer ashamed to wheel with you." - Jeremy

Offline Runner

  • Committee: Vendor
  • *
  • Posts: 1756
Re: Tom Woods CV Driveshafts - LJ
« Reply #10 on: August 12, 2017, 12:01:59 PM »
Since I didn't want to split them, they've been put away in storage for now. Since then, I haven't made my mind up whether I'll sell or just hold onto them. PM me when you're ready and I'll let you know one way or the other.

Rich
2004 Wrangler Unlimited - "Owning a Jeep is a sickness. However, it's one I'll gladly endure!"

Offline sirjames186

  • Club Secretary
  • *
  • Posts: 1647
  • 05 LJ
Re:
« Reply #11 on: August 12, 2017, 12:06:02 PM »
Sounds good!

Sent from my SM-G930V using Tapatalk

"I'm no longer ashamed to wheel with you." - Jeremy

Offline taterhed

  • Forum User
  • Posts: 5
Re: Tom Woods CV Driveshafts - LJ
« Reply #12 on: October 03, 2017, 06:27:58 AM »
Still got these (both?)

Thanks.


Offline schreiberaj

  • Member 2017
  • *
  • Posts: 102
Re: Tom Woods CV Driveshafts - LJ
« Reply #13 on: December 16, 2017, 09:08:41 AM »
These are setup for a 231 transfer case and a 3.5" lift. They have less than 5k miles and are in great shape.
$350
1310? I'd be very interested in the front if you still have it and are willing to split please message me.


Sent from my iPhone using Tapatalk

 

Powered by EzPortal
Officers:
President: Jeremy Long (JK_HVGC) | Vice President: John Davis (jdavis2nd) | Secretary: James Wesolek (sirjames186)
Treasurer: Danille Wilson (TJ Girl) | Member-at-large: Alex Zaiken (z4iken)

Board of Directors:
Andrew Harvin (HarvinJeep) | Dave Plummer (HAWAIICJ) | Sean McCready (Unl1mtd)
Jeff Wilson (jwilson2598) | Aaron Thomson (Jeep Freak) | Dain Wilson (Gr8Dain)

Founding Fathers:
Jason Markvart (LNDSRK) | Steve Scott (Islander90) | Josh Storer (Jastor)| Mike Finelli (BiggMike) | John Harper (Opie)

Disclaimer Statement:
All images from NoVaJeepers.net are exclusive to the Northern Virginia Jeepers Association. Any reproduction of exclusive Northern Virginia Jeepers Association material is strictly prohibited without written consent of the Northern Virginia Jeepers Association.

Materials are copyright Northern Virginia Jeepers Association 2002-2018.